State two important rules to be observed before operating machines in the workshop

Rules to be observed when using machines

  1. No adjustments must be made while the machine is running
  2. Run the machine to full speed before starting to feed materials
  3. When you turn off the machine wait until the motor stops.               

Print Friendly, PDF & Email
Post Views: 2
Tell your friends about this content:

Related posts:

  1. State any two safely precautions to be observed when grinding tools
  2. State any two safely precautions to be observed when Sharpening tools
  3. What determines the size of a surface planer?
  4. State any two factors to consider when determining the method of timber conversion
  5. Differentiate between countersinking and counterboring
  6. Differentiate between paring and chopping
  7. List four precautions to be observed when using a hand saw
  8. Differentiate between apprenticeship training and craft training
  9. Name the iron monger used for keeping the cabinet door in a closed position without locking
  10. Sketch the following methods of nailing: Dovetail nailing,
  11. Outline the procedure of manufacturing chipboard from raw materials
  12. With aid of sketch, describe each of the following timber defects
  13. Figure 3 shows a rectangular speaker grill with a elliptical hole. Illustrate the procedure of making out the hole using pin and string method
  14. Outline the procedure of applying a first – coat of oil paint on wooden surface
  15. The figure 4 below shows a bookshelf made of camphor wood. The back is fitted with a 3mm plywood. The number of screw used is 15. All members are 20mm thick.
Leave a Reply 0